All Products

• Low dust Cr 1.6 steel grit for Surface finishing
• Good toughness angular steel grit for sandblasting
• blasting media GLsteel grit for gang saw cutting
• widely used P steel grit for gang saw cutting
• high quality GP steel grit for Surface cleaning
• low consumption density 7.4 steel grit for stone cutting
• Good toughness steel grit for surface cleaning
• Good quality angular steel grit for marble cutting
• Good toughness SAE J444 steel grit for marble cutting
• high quality Mn 1.2% steel grit for stone cutting

• high strength sulfur<0.05% bearing steel grit for surface removal
• Good toughness steel grit for gang saw cutting
• widely used P<0.05% steel grit G18 for surfacet treatment and cleaning
• widely used P<0.05% steel grit for Surface blasting
• high strength sulfur<0.050% steel grit for surface corrosion
• high efficient Mn 1.2% steel grit for Surface finishing
• widely used P<0.05% steel grit for Surface rust and coatings removal
• Good toughness angular steel grit for stone cutting
• Good toughness angular steel grit for Industrial sandblasting
• High tenacity Specific Weight 4.1 steel grit 0.3mm for shot blasting

• fast cutting speed Specific Weight 4.1 steel grit GH80 for stone cutting
• self-sharpening Specific Weight 4.1 abrasive steel grit for gang saw cutting
• good hardnessTempered steel grit 0.3mm for granite cutting
• nice microstructure Tempered steel grit G80 for marble cutting
• less consumption Tempered G80 steel grit for cutting with saw blade
• high efficient Tempered steel grit abrasive for stone cutting industry
• high durability Tempered steel grits used for stone factory
• widely used angular P<0.05% steel grit for stone cutting
• sandblasting media GH steel grit for cutting
• high efficient Mn steel grit GL16 for stone cutting

• sulfur<0.050% steel grit for gang saw cutting
• widely used 41 ~ 50HRC steel grit for gang saw cutting
• Good toughness 50 ~ 55HRC steel grit for marble cutting
• Good toughness angular steel grit G80 for compressor disks sandblasting
• high efficient Mn steel grit G80 for gang saw cutting
• widely used P<0.05% steel grit for surface preparation of metal
• sandblasting media GP steel grit for marble cutting
• high quality media GH steel grit for compressor disks blasting
• high strength sulfur<0.050% bearing steel grit 0.3mm for surface preparation of oil for multi-layer coatings
• widely used Si 0.40 -1.20% steel grit for compressor disks sandblasting

• high efficient Cr 0.60 -1.60% bearing steel grit 0.3mm for compressor disks sandblasting
• high strength 42 ~ 50HRC steel grit for marble cutting
• high strength Durability 3200 times steel grit for stone cutting industry
• widely used C 1.20% steel grit for marble cutting
• sandblasting media SAE steel grit G18 for marble cutting
• high efficient Mn 1.2% bearing steel grit 1.2mm for granite cutting
• sandblasting media GH bearing steel grit G18 for gang saw cutting
• high strength Mn 1.20% bearing steel grit 1.2mm for gang saw cutting
• sandblasting media GH steel grit for Surface blast cleaning
• Good quality full angular bearing steel grit G18 for gang saw cutting

• sandblasting media GH steel grit G18 for Surface rust and coatings removal
• high durability Tempered bearing steel grit for surface treatment steel shot & grit
• good tenacity S <0.03% steel grit for gangsaw and granite cutting steel grit GH18
• High tenacity Specific Weight 4.1 steel grits for shot blasting
• high efficient P<0.05% cast steel grit G18 for stone cutting
• widely used 3200 times steel grit for Surface treatment
• Good toughness 50 ~ 55HRC cast steel grit G18 for granite cutting
• Good quality 50 ~ 55HRC steel grit G18 for marble cutting
• high strength full angular cast steel grit G18 for Surface rust and coatings removal
• Good toughness 60 ~ 68HRC bearing steel grit GL40 for Surface pre-treatment

• Blast cleaning sandblasting abrasive for gang-saw granite cutting
• high density hardness GL steel grit G40 for casting parts descaling
• Petro chemical bearing steel grit 0.7mm for blasting of machined parts
• Sand blast chamber abrasive steel grit gl40 for compressor disks sandblasting
• Long working life abrasive steel grit gl18 for aluminum oxide sand blasting
• widely used 41 ~ 50HRC bearing steel grit GL40 for granite cutting
• high strength GL blasting steel grit gL40 for stone cutting
• Good toughness full angular steel grit g40 for Surface pre-treatment
• high strength Cr 1.60% abrasive blasting steel grit gl 18
• sand blasting SAE J444 steel grit for Industrial sandblasting

• low carbon 3200 times steel grit G18 for stone cutting industry
• high efficient Mn 1.2% abrasive blasting steel grit gl 18 for gang saw cutting
• widely used full angular bearing steel grit G18 for granite cutting
• abrasives media Mn 1.2% angular steel grit G18 for gang saw cutting
• nice microstructure P<0.05% steel grit G18 for marble cutting
• screened strictly Mn 1.2% bearing steel grit G18 for stone cutting
• Low carbon Mn 1.2% abrasive grit G18 for stone cutting
• chrome alloy materials sulfur<0.050% steel grit G18 for marble cutting
• good hardness Si 0.70-1.0% GP80 steel grit for stone cutting
• high densityTempered steel powder for gang saw cutting

• long lifetime Tempered steel grit in abrasives for granite cutting
• less consumption Tempered steel powder for marble cutting
• ISO9001 Tempered steel grit in abrasives used for stone factory
• good fatigue resistence GH steel grit G18 for gang saw cutting
• high hardness sulfur<0.050% blasting steel grit gL40 for marble cutting
• high strength sulfur<0.050% sandblasting steel grit g40 for gang saw cutting
• screened strictly sulfur<0.050% sand blasting abrasive gl40 steel grit
• High wearing resistance P<0.05% steel grit gL40 for granite cutting
• nice microstructure angular sandblasting steel grit GL40 for Industrial sandblasting
• chrome alloy materials sulfur<0.050% steel grit G25 for stone cutting

• Chrome included angular steel grit G25 used for stone factory
• industrial product sulfur<0.050% steel grit gl 25 blasting for offshore pipe sandblasting
• high density sulfur<0.050% hardness gl25 steel grit for surfaceTreatment of steel bars
• with good tenacity Mn 1.2% steel grit G25 for surface rust cleaning
• nice microstructure sulfur<0.050% bearing steel grit G18 used for blasting abrasives
• fast cutting speed Specific Weight 4.1 steel grit abrasive for stone cutting
• waterjet sands Specific Weight 4.1 steel grit GH80 for gang saw cutting
• ISO9001 Tempered cast iron shot for granite cutting
• high wearing resistance C 0.85-1.0% steel grit abrasive for marble cutting
• good hardness Si 0.70-1.0% steel grit abrasive for cutting with saw blade